GCode command to setup Duet3d milling mode. Specifies that the words should be separated with a white space. Useful to find if your machine loss steeps or have any other mechanic issue (like loose pulleys). Set origin when gcode start (G92 X0 Y0 Z0). So the preprocessor will issue additional pauses for TURN ON/TURN OFF the motor. Set it to true when the motor of your spindle is controlled by manual switch. High speed for travel movements Z (mm/min). High speed for travel movements X & Y (mm/min). Target firmware (marlin 2.0 or Repetir 1.0.3 / GRBL 1.1) / RepRap Firmware. User Properties Group 1: Job propertyes Title Support GRBL laser mode ( be noted that you probably to have enabled laser mode $32=1).Customizable level of verbosity of comments.

You may attach relays to control external devices - as example air jet valve. Support for 3 different laser power using 'cutting modes' (through, etch, vaporize).

Tested with LCD display and SD card (built in tool change require printing from SD and LCD to restart).

Arcs support on XY plane (Marlin/Repetier/RepRap) or all panes (Grbl).

Support MM and Inches units ( but all properties MUST be set in MM).

Setup operation types: Milling, Water/Laser/Plasma.

CAM posts processor for use with Fusion 360 and MPCNC with RAMPS or any 3-axis DIY CNC.

Fusion 360 grbl